欢迎光临高温电阻加热炉厂家 - 洛阳高温电阻炉厂家
真空热压炉 TF-1200℃-VP/Vacuum hot-pressing furnace
您的位置： 洛阳高温电阻炉厂家-电炉选购-真空热压炉 TF-1200℃-VP/Vacuum hot-pressing furnace
主要特点Main features:
Open type vertical heating furnace,tube and flange can pivot and move away from chamber.
开启式立式加热体，炉管法兰可绕轴旋转移出炉腔。
With standard configuration of OD100mm quartz tube and 40T electrical press
标配Φ100mm石英管真空密封，40T电动压力机。
Adopt graphite push rod and mould,at the same time of pressing,heat the powder to common sintering temperature or lower,to get the dender and uniform product after a short time
采用石墨顶杆和石墨模具，在加压的同时使粉末加热到正常烧结温度或更低一些，经过较短时间烧结成致密而均匀的制品。
技术参数Technical Parameters
|
Power 输入电源 |
Power rated:3KW 额定功率：3KW |
||||
|
Voltage 电压 |
Voltage rated:AC220V 50/60HZ 额定电压：AC220V 50/60HZ |
||||
|
Working Temperature 工作温度 |
Max. Temperature: 1200℃( 1 hr) 额定温度：1200℃ (1小时) Continuous working temperature:≤1150℃ 持续工作温度：≤1150℃ Max.heating Rate:≤10℃/min 蕞快升温速率：≤10℃/分 |
||||
|
控温方式 |
PID automatic control andauto-tune function. 模糊PID控制和自整定调节 30 programmable segments for precise thermal processing. 智能化30段可编程控制 Built-in protection for the over-heated and broken thermocouple. 超温和断偶报警功能 |
||||
|
Heating Elements 加热元件 |
Resistance wire, Fe-Cr-Al Alloy doped by Mo 电阻丝（掺钼铁铬铝合金） |
||||
|
Temperature Accuracy 控温精度 |
+/- 1℃ |
||||
|
Prosessing tube 炉管 |
Φ100*460mm
|
||||
|
Graphite rod diameter 石墨压杆直径 |
87mm |
||||
|
Pressuremaintaintime 保压时间 |
0-50min |
||||
|
Movable distance 压力行程 |
50mm |
||||
|
Plunger diameter 活塞直径 |
87mm |
||||
|
Pressure stability 压力稳定性 |
≤1MPa/5min |
||||
|
Weight 重量 |
400kg |
||||
|
真空法兰 |
Special designedflanges 定制法兰 |
||||
|
Vacuum Pressure 真空压力 |
133torr can be achieved by mechanical pump 机械泵可达133torr（1pa） 10^-6 torr can be reached by molecular pump 分子泵可达10^-6torr（10^-3pa） Please click the picture below to order vacuum parts 参考下列图片订购真空部件 |
||||
|
Warranty 质保 |
One year limited warranty with lifetime support (Such consumable parts as tO-rings, etc. are NOTsupportedby the warranty) 一年质保终身支持（消耗品如O型圈等不在质保范围内） |
||||
|
Warning 注意事项 |
Graphite must used under anaerobic condition 石墨必须绝氧使用 Considering contact area calculate pressure 计算压强时应考虑接触面积 Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired withalumina coating. 在使用过程中炉膛表面可能出现细小裂纹。这是正常情况，裂纹可以用氧化铝涂层修复。 |
||||
|
Compliance 认证 |
CE Certified CE认证 The furnace is ready topass TUV(UL61010) or CSAcertification at extra cost. 可付费进行TUV(UL61010)或CSA认证 |
||||
|
Operation instructions 操作指导 |
the operating manual 参考下载说明书
|
厂家哪家好?哪个厂家的质量好啊? 西格马作为专业的厂家，具有多年研发经验与多项专利，价格合理、型号齐全、质量可靠。
