2500℃真空热压炉\2500℃真空热压烧结炉

SGM2500℃真空热压炉为洛阳西格马高温电炉生产的高温烧结炉，采用石墨加热，温度可达2500度；可提供50 吨（美制，即45,450kg压力）的热压能力。2500℃真空热压炉由腔体、加热区、电源供应、控制系统或柜、压力框、压力系统、高真空系统、充气/惰性气体系统等组成。

Sgm2500 ℃ vacuum hot pressing furnace is a high-temperature sintering furnace produced by Luoyang sigma high-temperature electric furnace. It adopts graphite heating, and the temperature can reach 2500 degrees. It can provide 50 tons (US made, i.e. 45450kg pressure) hot pressing capacity. The 2500 ℃ vacuum hot pressing furnace is composed of cavity, heating area, power supply, control system or cabinet, pressure frame, pressure system, high vacuum system, gas charging / inert gas system, etc.

2500℃真空热压炉用途：

Application of 2500 ℃ vacuum hot pressing furnace:

2500℃真空热压炉可用于陶瓷/金属矩阵组合、参入金属成分研究；扩散结合力，可热冲击氧化物、氮化物、硼化物、碳化物、硫化物、混合物等，接近理论密度研究，烧结等；

2500 ℃ vacuum hot pressing furnace can be used for ceramic / metal matrix combination and metal composition research; diffusion bonding force can be used for thermal shock of oxides, nitrides, borides, carbides, sulfides, mixtures, etc., close to theoretical density research, sintering, etc;

2500℃真空热压炉结构特点：

The structural features of 2500 ℃ vacuum hot pressing furnace are as follows

1、温度可加热到2500℃（4,532 F）；

 The temperature can be heated to 2500 ℃ (4532 f);

2、设计，压力可达50 吨（美制，即45,450kg压力）；

Design, pressure up to 50 tons (US, i.e. 45450kg pressure);

3、可在真空、或通入气体，氮气、氢气环境下操作；

It can be operated in vacuum or gas, nitrogen and hydrogen environment;

4、立的控制/电源控制台；

Independent control / power console;

5、立的高温室、以及立的加压装置；

Independent high temperature chamber and independent pressure device;

6、全自动的液压控制系统；

Automatic hydraulic control system;

真空热压炉技术指标：

The overall technical indexes of vacuum hot pressing furnace are as follows:

1、额定温度：2500℃（4,532 F）；

Rated temperature: 2500 ℃ (4532 f);

2、可使用的工作区域（zui大模子尺寸）：直径165 mm x高165 mm；

Usable working area (Zui large mold size): 165 mm in diameter x 165 mm in height;

3、工作气氛：

Working atmosphere:

1） 2PSIG （140g/cm2）的气体：氩气（Ar），氧气含量须<2 PPM；

 2 psig (140 g / cm2): argon (AR), oxygen content must be less than 2 ppm;

2）额定的真空度：7、5 x 10-6 Torr（托，1Torr=1、333mBar），（在21℃时，工作腔为干净、干燥、空余状态）；

 When the rated cavity is torr-333, the working condition is torr-333 (1、5 ℃), and the working condition is dry (Torr = 1、5 ℃);

4、真空漏失率：<1X10-9 STD CC/S 氦气；

Vacuum leakage rate: < 1x10-9 STD CC / s helium;

5、额定工作压力：50 吨（美制，即45,450kg压力）；

Rated working pressure: 50 tons (US system, i.e. 45450kg pressure);